PMA Parts
 

(Scroll down if you are looking for our brand new Rocker Box Covers for your Lycoming R-680)

Link to PDF:  Stearman Airframe Parts Catalog

 

FAA-PMA STEARMAN CLAMPS

These clamps are formed from annealed aluminum and then heat treated.  This process is how the original clamps were manufactured.

YAS-106-D51          Clamp 3/4" Tube Aluminum                         16.95 ea

                                 1 lower bird cage brace.

 
 

YAS-107-D51          Clamp 7/8" Tube Aluminum                         16.95 ea

                                 8 bird cage, 1 oil line support.

 
 

YAS-108-D51          Clamp 1" Tube Aluminum                            16.95 ea

                                 6 floor boards, 4 data case back of seat,

                                 2 battery tray, 2 front trim tab control,

                                 2 oil line support.

 
 

YAS-108-D64          Clamp 1" Tube Aluminum                            16.95 ea

                                 1 air intake to mount, 2 fuel valve bracket,

                                 2 fuel sump bracket, 2 front dash panel.

 
 

YAS-109-D51          Clamp 1-1/8" Tube Aluminum                     16.95 ea

                                 9 bird cage, 3 rear trim tab control,

                                 2 floor boards, 2 battery tray.

 
 

YAS-109-D64          Clamp 1-1/8" Tube Aluminum                     16.95 ea

                                 2 rear dash panel.

 

 

YAS-110-D51          Clamp 1-1/4" Tube Aluminum                    16.95 ea

                                 2 bird cage, 4 rear of cockpit bulkheads,

                                 2 carb heat control,4 front trim control plate,

                                 2 floor boards.

 

FAA-PMA Stearman Battery Trays

These trays are formed and heat treated just like the originals. The tray is configured for the standard 35 amp aircraft battery.

Yesteryear
Part No.
Price
YA-A75N1-3917
199.95 ea 

 

FAA-PMA Battery Hold Down Stud

Machined tool cut threads and Cadmium plated.  Two required per airplane.

Yesteryear
Part No.
Price
YA-A75N1-3919
19.95 ea 

 

FAA-PMA Wing and Horizontal Inner Inspection Ring

This part is riveted to the horizonal stabilizer and glued into the fabric on the upper and lower wings.  14 are used on the wings and 2 on the horizontal.

Yesteryear
Part No.
Price
YA75-1118
39.95 ea 

 

FAA-PMA Outer Inspection Window Frame

This frame is used on both wings and the horizontal stabilizer.  2 required for the horizontal, 2 required per upper wing, and 5 per lower wing.   

Yesteryear
Part No.
Price
YA75-1117
12.95 ea 

 

FAA-PMA Wing Inspection Window

These clear windows are used on both the upper and lower wings.

Yesteryear
Part No.
Price
YA75-1119
11.95 ea 

 

FAA-PMA Horizontal Stabilizer Inspection Window

These clear windows are used on the horizontal.  2 required.

Yesteryear
Part No.
Price
YA75-1727
15.95 ea 

 

FAA-PMA Dzus Bracket Lower Wing (Front)

Used on lower wings at the front for the wing attach bolt inspection door.  These brackets are formed and heat treated as originally manufactured.  1 required per wing. 

Yesteryear
Part No.
Price
YA75-2404
34.95 ea 

 

FAA-PMA Dzus Bracket Lower Wing (Rear)

Used on the bottom of the lower wings at the long narrow door for the rear wing attach bolt.  These brackets are formed and heat treated as originally manufactured.  2 required per wing. 

Yesteryear
Part No.
Price
YA75-1276
34.95 ea 

 

FAA-PMA Dzus Bracket Airframe

Used on front of birdcage, firewall, etc. These brackets are formed and heat treated as originally manufactured.  24 required per airplane. 

Yesteryear
Part No.
Price
YA75-1216
34.95 ea 

 

FAA-PMA Bulkhead Fuselage Side Cowl Support 

Used just behind the landing gear ahead of the lower wing.  These bulkheads and Dzus brackets are formed and heat treated just as the originals.

Yesteryear
Part No.
Price
YA75-2341 (L.H.)
209.95 ea 
Yesteryear
Part No.
Price
YA75-2341-1 (R.H.) 
209.95 ea 

 

FAA-PMA Aileron Control Stop Bolt

2 required per airplane.

Yesteryear
Part No.
Price
YA75-3326-3
12.95 ea 

 

FAA-PMA Elevator Control Stop Bolt

2 required per airplane.

Yesteryear
Part No.
Price
YA75-3326-1
12.95 ea 

 

 

FAA-PMA Elevator Push-Pull Tube Control Fork Bushing

These have been thoroughly tested for the correct rubber composition as specified by the original Boeing prints using a specialized tool that measures deflection under force.  Two required per airplane.

Yesteryear
Part No.
Price
YA75-3328
79.95 ea 

FAA-PMA Center Section Wing Attach Plate Bushing/Spacer

These are precisioned machined to factory tolerances.

Yesteryear
Part No.
Price
YA75-4520-1 Short
34.95 ea 
Yesteryear
Part No.
Price
YA75-4520-2 Long
34.95 ea 

 

 

FAA-PMA Lower Wing Attach Plates

CNC precision machined.  Circle milled holes (instead of drilled) for a round and true hole. Pictured bushing is included.

Yesteryear
Part No.
Price
YA75-1220 SET Front Pair 
159.95 
Yesteryear
Part No.
Price
YA75-1221 SET Rear Pair
 159.95  

 

 

FAA-PMA Upper Wing Attach Plates

CNC precision machined. Circle milled holes (instead of drilled) for a round and true hole. Pictured bushing is included.

Yesteryear
Part No.
Price
YA75-1120 SET Front Pair 
159.95 
Yesteryear
Part No.
Price
YA75-1121 SET Rear Pair
 159.95  

 

FAA-PMA Rudder Pedal Rack

Yesteryear
Part No.
Price
YA-E75-3413
64.95 ea.

 

 

FAA-PMA Landing Gear Towing Eyes

One-piece forged steel towing eye as Boeing originally manufactured.

Yesteryear
Part No.
Price
YA75-2626
94.95 ea.

 

 

 

FAA-PMA Fuselage Cowl Filler Plate

This plate is often missing.  It is used with the upper front cover around the lugs where the upper cabane struts attach to the fuselage.  2 required per airplane.

Yesteryear
Part No.
Price
YA75-2336
15.95 ea.

 

FAA-PMA Oil Tank Mounting Felt

Yesteryear
Part No.
Price

YA-3148-O Complete Set

39.95

 

YA-3148-4 (2 req.)

15.00 ea.

YA-3148-6 (2 req.)

10.00 ea.

 

FAA-PMA Fuel Tank Felt Straps

All of the lacing cord holes have been pre-punched in proper locations.  These are ready to install right out of the package.

Yesteryear
Part No.
Price

YA-3148-F Complete Set

139.95

 

YA-3148-1 4 req.

11.75 ea.

YA-3148-2 1 req.

11.75 ea.

YA-3148-3 1 req.

18.00 ea.

YA-3148-5 4 req.

11.75 ea.

YA-3148-7 2 req.

18.00 ea.

 

FAA-PMA Elevator Leading Edge

Yesteryear
Part No.
Price

YA75-1805-1

159.95 ea.

 

FAA-PMA W-670 Engine Control Bellcranks 

Yesteryear
Part No.
Price

YA-A75N1-2904-1 (Throttle)

YA-A75N1-2904-2 (Mixture)

199.95 ea.

 

FAA-PMA Engine Mount Washers

Yesteryear
Part No.
Price

 

 

YA-S136-CONT

84.95 set

YA-S136-LYC

84.95 set

YA-S136-1D 14 req.

5.95 ea.

YA-S136-2D 2 req.

6.95 ea.

 

FAA-PMA Rubber Engine Mounts

All of the rubber parts are made in the USA of high quality rubber to the correct durometer specification.  These mounts are not affected by fuel or oil, and they are approved for both the Continental R-670 and the Lycoming R-680.

Yesteryear
Part No.
Price
YAS-125-SET
307.20 

Motor Mount Only

Yesteryear
Part No.
Price
YAS-125-1-75
17.50 ea. 

 Motor Mount Rubber Washer Only

Yesteryear
Part No.
Price
YAS-126-1-75
6.50 ea. 

 

 

GASKET PRICE LIST
CONTINENTAL W-670 ENGINE


The following parts are all FAA-PMA certified. The gaskets are made of high quality materials and are black in color.

The following gaskets are FAA-PMA approved for use on the following engines:
W-670-6A, -6N, -16, -K, -M, -23, -24.

YA22075 COMPLETE OVERHAUL GASKET SET $440.00 set
Includes The Following:
 
1 YA20951-1 FRONT SUMP GASKET
1 YA20952-1 REAR SUMP GASKET
7 YA20275-1 SUMP/ROCKER HOSE
14 YA20268-1 LOWER TAPPET GUIDE GASKET
1 AN900-16 SUMP PLUG SEAL
14 YA20254-1 ROCKER COVER GASKET
6 AN900-12 ROCKER NIPPLE SEAL
7 YA2827-1 INTAKE AT CYLINDER GASKET
14 YA24335-1 PUSH ROD TUBE BASE GASKET
7 YA2845-1 CYLINDER BASE PACKING
14 YA20266-1 PUSH ROD TUBE UPPER PACKING
7 YA2096-1 LOWER INTAKE PIPE PACKING
1 YA3112-1 ACC. CASE GASKET
2 YA2249-1 STARTER GASKET
1 YA20467-1 SCAVAGE ELBOW GASKET
2 YA20889-1 SEAL MAG. DRIVE GEAR
1 YA500060-1 GENERATOR DRIVE HOUSING
1 YA22442-1 STEP UP DRIVE TO GENERATOR
1 YA500062-1 STEP UP DRIVE SHAFT GASKET
1 YA22443-1 TACH DRIVE TO CASE GASKET
1 YA3710-1 DUPLEX OIL PUMP MOUNT
1 YA3939-1 DUPLEX OIL PUMP PLATE GASKET
2 YA20977-1 DUPLEX OIL PUMP SEAL
2 YA20748-1 DUPLEX OIL PUMP OUTLET
1 AN900-16 SEAL PRESSURE ADJUST
1 YA20423-1 FUEL PUMP GASKET
1 YA22143-1 FUEL PUMP GASKET
1 YA20532-1 SCAVAGE PUMP INNER GASKET
1 YA22446-1 SCAVAGE PUMP MOUNT GASKET
1 YA2589-1 GASKET HIGH PRESSURE OIL
1 AN900-10 HIGH PRESSURE OIL RELIEF PLUG
1 AN900-24 SEAL MAIN OIL SCREEN
1 AN900-16 SEAL SCAVAGE OIL SCREEN
2 YA22931-1 GASKET MAGNETO 6N ENGINE
2 YA2247-1 GASKET MAGNETO 6A ENGINE
1 YA22803-1 CARBURATOR BASE GASKET
1 YA22453-1 AIRHORN-CARBURATOR GASKET
1 AN900-16 AIRHORN PLUG GASKET
1 AN900-10 PRESSURE OIL SCREEN PLUG
1 AN900-12 GASKET-HOSE, SUMP NIPPLE
1 AN900-14 GASKET-LOW PRESSURE RELIEF
1 YA22142-1 SCAVAGE PUMP DRIVE SHAFT
1 YA531090-1 GASKET-STARTER MOUNT
14 AN900-16 PUSH ROD TUBE GLAND NUT
1 YA20421-1 SEAL SCAVAGE OIL LINE
 
YA22065 TOP OVERHAUL GASKET SET $264.00 set
Includes The Following:
 
1 YA20951-1 FRONT SUMP GASKET
1 YA20952-1 REAR SUMP GASKET
7 YA20275-1 SUMP/ROCKER HOSE
14 YA20254-1 ROCKER COVER GASKET
6 AN900-12 ROCKER NIPPLE SEAL
7 YA2827-1 INTAKE AT CYLINDER GASKET
14 YA24335-1 PUSH ROD TUBE BASE GASKET
7 YA2845-1 CYLINDER BASE PACKING
14 YA20266-1 PUSH ROD TUBE UPPER PACKING
7 YA2096-1 LOWER INTAKE PIPE PACKING
1 AN900-16 SUMP PLUG SEAL
14 AN900-16 PUSH ROD TUBE GLAND NUT
 
YA22055 CYLIINDER REPLACEMENT SET $38.00 set
Includes The Following:
 
2 YA20254-1 ROCKER COVER GASKET
1 YA2827-1 INTAKE TUBE TO CYLINDER GASKET
2 YA24335-1 PUSHROD TUBE GASKET
1 YA2845-1 CYLINDER BASE SEAL
2 YA20266-1 PUSHROD TUBE PACKING SEAL
1 YA2096-1 INTAKE PIPE PACKING
2 AN900-16 PUSHROD GLAND NUT GASKET

NOW AVAILABLE

FAA-PMA certified high quality BLACK rubber gaskets for the rocker cover, push rod tube base and lifter guide used on the Continental W-670, Lycoming R-680, Wright 760 and Wright 975 engines. This material will not squeeze out like the orange silicone and will seal uneven surfaces.

YA20254-R ROCKER COVER RUBBER GASKET CONTINENTAL 7.00 ea.
YA1843-R LYCOMING ROCKER COVER GASKET 7.00 ea.
YA1185-R LYCOMING FRONT SUMP GASKET 4.00 ea.
YA1183-R LYCOMING REAR SUMP GASKET 5.00 ea.
YA655706-R CONTINENTAL A-65 THROUGH 0-300 ROCKER COVER GASKETS 9.00 ea.
YA4331 JACOBS R-755 AND R-830 ROCKER COVER GASKET 7.00 ea.
YA110001-R CURTIS WRIGHT ROCKER COVER R-975 & R-760 ENGINES 7.00 ea.

 

Individual Gasket Prices    
 
YA2096-1 INTAKE PIPE SEAL AT CASE 4.50 ea.
YA2247-1 MAGNETO MOUNT GASKET (VMN TYPE) 5.00 ea.
YA2249-1 STARTER MOUNT GASKET 5.00 ea.
YA2589-1 OIL SCREEN HOUSING GASKET . 3.00 ea.
YA2827-1 GASKET INTAKE PIPE AT CYL. 10.00 ea.
YA2845-1 CYL. BASE SEAL 3.20 ea.
YA3112-1 ACCESSORY CASE GASKET 20.00 ea.
YA3710-1 DUPLEX PUMP MOUNT GASKET 5.00 ea.
YA3939-1 DUPLEX INTERNAL GASKET 5.00 ea.
YA20254-1 ROCKER COVER 3.50 ea.
YA20266-1 SEAL PUSH ROD TUBE 3.50 ea.
YA20268-1 LIFTER GUIDE GASKET 2.50 ea.
YA20275-1 ROCKER HOSE . 4.50 ea.
YA20421-1 SEAL SCAVAGE OIL LINE BETWEEN CASES 2.50 ea.
YA20423-1 FUEL PUMP MOUNT GASKET . 3.50 ea.
YA20467-1 ROCKER ELBOW GASKET . 1.50 ea.
YA20532-1 SCAVAGE PUMP LEAD GASKET 6.00 ea.
YA20748-1 OIL OUTLET GASKET 2.00 ea.
YA20889-1 MAGNETO DRIVE GEAR SEAL . 15.00 ea.
YA20951-1 FRONT SUMP GASKET 3.50 ea.
YA20952-1 REAR SUMP GASKET 3.50 ea.
YA20977-1 DUPLEX OIL PUMP SEAL 11.00 ea.
YA22142-1 SCAVAGE PUMP SEAL 11.00 ea.
YA22143-1 FUEL PUMP GASKET 3.50 ea.
YA22442-1 GENERATOR MOUNT GASKET 3.50 ea.
YA22443-1 TACH DRIVE GASKET 3.00 ea.
YA22446-1 SCAVAGE PUMP MOUNT GASKET 5.00 ea.
YA22453-1 AIR HORN TO CARB. GASKET 5.00 ea.
YA22803-1 CARBURATOR MOUNT GASKET 3.50 ea.
YA22931-1 MAGNETO MOUNT GASKET (SF7 TYPE) 5.00 ea
YA24335-1 PUSH ROD TUBE GASKET 2.50 ea.
YA500060-1 STEP DRIVE TO CASE GASKET 3.00 ea.
YA500062-1 STEP DRIVE GASKET 4.00 ea.
YA531090-1 STARTER MOUNT GASKET (Thick) 7.50 ea.
AN900-12   .75 ea.
AN900-16   1.00 ea.
AN900-10   .50 ea.
AN900-24   .75 ea.
AN900-14   1.00 ea.

FAA-PMA LYCOMING 225 AND 300 H.P. ENGINE GASKETS AND SETS

These gaskets are all new production and are black in color.
Lycoming gaskets and gasket sets listed below fit both the 225 h.p. and 300 h.p. engines except where noted.
The gaskets that fit both engines are eligible for models R-680-E3,-E3A,-E3B,-E2,-E1,-B4E,-B4B,-B4,-B4C,-B4D.
The gaskets that work on the 225 h.p. engines include models R-680-B4E,-B4B,-B4,-B4C,-B4D.
The gaskets that fit the 300 h.p. engines include models R-680-E3,-E3A,-E3B,-E2.-E1.

Yesteryear
Part No.
Description
# /
Engine
Price Each
YASTD-186 SEAL TACHOMETER DRIVE
2
14.00
YASTD-187 SEAL GENERATOR DRIVE
1
17.00
YASTD-346 SEAL ROCKER ARM SHAFT
36
2.00
YASTD-347 HOSE ROCKER BOX
2
4.50
YASTD-388 HOSE ROCKER BOX
13
6.50
YASTD-389 HOSE ROCKER BOX
4
6.50
YASTD-499 CYLINDER BASE PACKING
9
3.20
YASTD-548 SEAL VACUUM PUMP DRIVE
1
13.00
YA140 SEAL VALVE ADJUSTING SCREW
18
2.75
YA159 GASKET-GOVERNOR BASE 300 H.P.
1
4.50
YA177 GASKET-DISTRIBUTOR OIL SEAL
1
4.00
YA179-B GASKET- GOVERNOR MOUNT 300 H.P.
1
4.50
YA231 GASKET-DISTRIBUTOR MOUNT
1
4.00
YA238 GASKET-MAGNETO MOUNT
1
3.50
YA404-B GASKET-INTAKE PIPE
9
3.50
YA405 PACKING-EXHAUST OUTLET 225 H.P.
9
22.00
YA1268 GASKET-CAM IDLER GEAR PIN
1
2.50
YA568 PACKING-INTAKE PIPE
9
5.00
YA573-C GASKET-OIL STRAINER NUT
1
4.00
YA680-AA CRANKPIN OIL SEAL
2
2.00
YA690-D GASKET-LIFTER GUIDE
18
2.50
YA715 PACKING-THRUST BEARING CAP
1
5.00
YA843-B GASKET-OIL PUMP MOUNT
1
3.50
YA848-B GASKET-CARBURETOR MOUNT
1
4.00
YA849-C GASKET-OIL RELIEF VALVE BODY
1
3.50
YA852-D GASKET-ACCESSORY DRIVE HOUSING
1
22.50
YA1027-C GASKET-GENERATOR MOUNT
1
5.00
YA1045-C GASKET-CRANKCASE BREATHER
1
3.00
YA1076 GASKET-MAGNETO DRIVE BASE
2
4.00
YA1077-B GASKET-THRUST BEARING CAP
2
3.00
YA1111-C PACKING-PUSHROD TUBE
18
5.00
YA1112-BC HOSE-PUSHROD TUBE
18
5.00
YA1169-B GASKET-ACC. HOUSING BREATHER
1
3.00
YA1183-B GASKET-OIL SUMP REAR
1
4.00
YA1183-R GASKET-OIL SUMP REAR RUBBER
1
5.00
YA1185-B GASKET-OIL SUMP FRONT
1
3.00
YA1185-R GASKET –OIL SUMP REAR RUBBER
1
4.00
YA1396-B GASKET-STARTER MOUNT
1
7.50
YA1503-B GASKET-CARBURETOR AIR INTAKE
2
4.00
YA1691-C GASKET-FUEL PUMP MOUNT
1
3.50
YA1699-C GASKET-VACUUM PUMP MOUNT
1
4.00
YA1747 GASKET-EXHAUST OUTLET 300 H.P.
9
10.00
YA1794 GASKET-FUEL DRIVE COVER
1
4.00
YA1794-B GASKET-GENERATOR DRIVE MOUNT
3
3.00
YA1821-B GASKET-CRANKCASE BREATHER
1
3.00
YA1843 GASKET-CRANKCASE BREATHER
18
3.50
YA1843-R GASKET-ROCKER COVER RUBBER
18
6.00
YA1882 GASKET-TACHOMETER DRIVE
1
4.00
YA1883-B GASKET-DIST. PACKING RETAINER
1
3.60
YA1884 PACKING-DISTRIBUTOR DRIVE SHAFT
2
3.00
YA1923-C GASKET-STARTER HOUSING
1
25.00
YA1940 GASKET-THRUST BEARING BREATHER
1
2.35
YA1952 GASKET-OIL FILTER
1
4.00
YA8313 GASKET-OIL FILTER
1
4.00
AN900-16 CRUSH GASKET
2
0.50
AN900-10 CRUSH GASKET
2
0.50
AN900-12 CRUSH GASKET
3
0.75

Major overhaul gasket sets:
The following sets include all gaskets and seals needed for a major overhaul. Gaskets are black in color and are made using high quality materials.

Yesteryear
Part No.
  Description
Price
YA680225-MS   225 H.P. engines
650.00
YA680300-MS   300 H.P. engines
758.00

Top overhaul gasket sets:
The following sets include all gasket and seals required to perform a top overhaul.

Yesteryear
Part No.
  Description
Price
YA680225-TS   225 H.P. engines
419.00
YA680300-TS   300 H.P. engines
515.84

Cylinder replacement sets:
The following sets include all seals and gaskets required to install one cylinder.

Yesteryear
Part No.
  Description
Price
YA680225-S   225 H.P. engines with regular gaskets
50.00
YA680300-S   300 H.P. engines with regular gaskets
45.00

FAA-PMA Stainless Steel 225 H.P. Exhaust Connecting Tube
This is the nipple that threads into the cylinder head which connects to the exhaust pipe. Now made using high grade stainless steel for long life.

Yesteryear
Part No.
Price
YA400-B
114.95 ea.

    

 

FAA-PMA Stainless Steel 225 H.P. Exhaust Connecting Clamp               

This high grade stainless steel clamp will not rust away like the original clamps.  It includes stainless bolt and locknut.

 

Yesteryear
Part No.
Price
YA401-AB
60.00 ea.

                   

 

 

NOW AVAILABLE 

FAA-PMA Lycoming R-680 Rocker Box Covers

The new rocker box covers are a big improvement over the orignal covers.  These heavy duty aluminum covers are much stiffer and will not bend like the originals.  They are designed specifically to stop the oil leak problem that the original covers suffered from.

Yesteryear
Part No.
Price
YA1842
60.00 each or
972.00 set

 

 

 

NEW NORTH AMERICAN FAA-PMA WING and
CENTER SECTION STRINGERS and PARTS

 (See diagram at end of inventory list for assembly locations)

These FAA-PMA parts are new manufactured and not old stock. The following items are FAA certified and manufactured in the U.S.A. using modern technology and heat treating. You can rebuild your wing or center section without the worry of corrosion problems. All wing and center section stringers are now available.

The following part numbers are currently FAA-PMA certified and eligible to be used on the following North American Models: BC-1A, AT-6, AT-6A, B, C, D, F, G, and SNJ-3, 4, 5, 6, 7 and Harvard I and II’s manufactured in the United States:

Yesteryear
Part No.
North American
Part No.
Description Price
YA77-14261 77-14261 ANGLE WING SPAR TO CENTER
SECTION SPAR ATTACHMENT
150.00 ea.

 
YA66-13069 66-13069 CENTER SECTION
UPPER FRONT STRINGER
575.00 ea.

 
YA66-13198 66-13198 CENTER SECTION
LOWER FRONT SPAR CAP
375.00 ea.
YA49-13105 49-13105 CENTER SECTION
UPPER FRONT SPAR CAP
375.00 ea.



 
YA-C266LT C266LT,1S61LT STRINGER WING
LEADING EDGE LOWER 16’ LONG
200.00 ea.

 
YA-C265LT C265LT,1C62LT STRINGER WING
LEADING EDGE UPPER 16’ LONG
200.00 ea.

 
YA-C366T C366T,1S107T,1E4T STRINGER BULB ANGLE 16’ LONG 144.00 ea.

 
YA-C148T C148T,1S84T,1E110T STRINGER ANGLE 12’ LONG 120.00 ea.

 
YA-K77A K77A STRINGER ANGLE 12’ LONG 120.00 ea.

 
YA-C250T C250T, 1E87T, 1S71T STRINGER ANGLE 11’ LONG 132.00 ea.

 
YA-C204T C204T, 1E100T, 1S59 STRINGER ANGLE 11’ LONG 132.00 ea.

 
YA-123LT C123LT, 1S40LT STRINGER ANGLE 16’ LONG 144.00 ea.

 
YA-C180T C180T, 1E2T, 1S100T STRINGER ANGLE 12’ LONG 200.00 ea.

 

 

                                                          

                                                                                                                                                        Stringer arrangement and stations are different for the AT-6A